Home > SKF MAINTENANCE TOOLS > Mounting Dismounting Kits
Sort By:
Page of 1
TMMP 2X65 Skf Jaw Puller
Our Price: $57.33
TMMP 2X170 Skf Jaw Puller
Our Price: $113.00
SKF jaw pullers are versatile two and three arm mechanical pullers

One of the easiest and most effective ways to dismount small to medium size bearings is to use a mechanical puller. Using an SKF jaw puller helps to ensure that no damage is caused to the bearing or to the bearing seating during dismounting. SKF standard jaw pullers offer you easy and safe jaw puller operation.

Range of five different jaw pullers with two or three arms
Maximum nominal span from 65 to 300 mm (2.6 to 11.8 in)
Cone system for automatic centring and secure positioning of arms
Strong springs to keep arms apart for easy operation
Hardened, high quality carbon steel
Combined internal and external puller

The multipurpose SKF TMMR F jaw pullers are able to grip on both the outside as well as the inside of a component, with equal strength. The TMMR Fs are available as a complete set, TMMR 8.

Both internal and external pulling
Puller for use in every workshop
Self-locking arms
Special safety neck avoids damaging of thread and arms
Hexagonal head on beam allows rotation of bearing during dismounting
Gripping range from 23 to 350 mm (0.9 to 13.8 in)
Also available as complete set on a stand
SKF jaw pullers are versatile two and three arm mechanical pullers

One of the easiest and most effective ways to dismount small to medium size bearings is to use a mechanical puller. Using an SKF jaw puller helps to ensure that no damage is caused to the bearing or to the bearing seating during dismounting. SKF standard jaw pullers offer you easy and safe jaw puller operation.

Range of five different jaw pullers with two or three arms
Maximum nominal span from 65 to 300 mm (2.6 to 11.8 in)
Cone system for automatic centring and secure positioning of arms
Strong springs to keep arms apart for easy operation
Hardened, high quality carbon steel
TMMP 3x185 Skf Jaw Puller
Our Price: $151.49
Combined internal and external puller

The multipurpose SKF TMMR F jaw pullers are able to grip on both the outside as well as the inside of a component, with equal strength. The TMMR Fs are available as a complete set, TMMR 8.

Both internal and external pulling
Puller for use in every workshop
Self-locking arms
Special safety neck avoids damaging of thread and arms
Hexagonal head on beam allows rotation of bearing during dismounting
Gripping range from 23 to 350 mm (0.9 to 13.8 in)
Also available as complete set on a stand
SKF jaw pullers are versatile two and three arm mechanical pullers

One of the easiest and most effective ways to dismount small to medium size bearings is to use a mechanical puller. Using an SKF jaw puller helps to ensure that no damage is caused to the bearing or to the bearing seating during dismounting. SKF standard jaw pullers offer you easy and safe jaw puller operation.

Range of five different jaw pullers with two or three arms
Maximum nominal span from 65 to 300 mm (2.6 to 11.8 in)
Cone system for automatic centring and secure positioning of arms
Strong springs to keep arms apart for easy operation
Hardened, high quality carbon steel
Combined internal and external puller

The multipurpose SKF TMMR F jaw pullers are able to grip on both the outside as well as the inside of a component, with equal strength. The TMMR Fs are available as a complete set, TMMR 8.

Both internal and external pulling
Puller for use in every workshop
Self-locking arms
Special safety neck avoids damaging of thread and arms
Hexagonal head on beam allows rotation of bearing during dismounting
Gripping range from 23 to 350 mm (0.9 to 13.8 in)
Also available as complete set on a stand
TMMP 3X230 Skf Jaw Puller
Our Price: $264.56
TMMP 3X300 Skf Jaw Puller
Our Price: $306.64
Combined internal and external puller

The multipurpose SKF TMMR F jaw pullers are able to grip on both the outside as well as the inside of a component, with equal strength. The TMMR Fs are available as a complete set, TMMR 8.

Both internal and external pulling
Puller for use in every workshop
Self-locking arms
Special safety neck avoids damaging of thread and arms
Hexagonal head on beam allows rotation of bearing during dismounting
Gripping range from 23 to 350 mm (0.9 to 13.8 in)
Also available as complete set on a stand
SKF jaw pullers are versatile two and three arm mechanical pullers

One of the easiest and most effective ways to dismount small to medium size bearings is to use a mechanical puller. Using an SKF jaw puller helps to ensure that no damage is caused to the bearing or to the bearing seating during dismounting. SKF standard jaw pullers offer you easy and safe jaw puller operation.

Range of five different jaw pullers with two or three arms
Maximum nominal span from 65 to 300 mm (2.6 to 11.8 in)
Cone system for automatic centring and secure positioning of arms
Strong springs to keep arms apart for easy operation
Hardened, high quality carbon steel
SKF jaw pullers are versatile two and three arm mechanical pullers

One of the easiest and most effective ways to dismount small to medium size bearings is to use a mechanical puller. Using an SKF jaw puller helps to ensure that no damage is caused to the bearing or to the bearing seating during dismounting. SKF standard jaw pullers offer you easy and safe jaw puller operation.

Range of five different jaw pullers with two or three arms
Maximum nominal span from 65 to 300 mm (2.6 to 11.8 in)
Cone system for automatic centring and secure positioning of arms
Strong springs to keep arms apart for easy operation
Hardened, high quality carbon steel
tmma 60 TMMA pullers series: mechanical EasyPull tmma tmma 80 TMMA pullers series : mechanical EasyPull tmma80 SKF tmma 120 TMMA pullers series mechanical EasyPull tmma120 Puller
Safe and simple bearing dismounting

Equipped with spring-operated arms and a solid design, SKF's patented EasyPull is one of the most user-friendly and safe tools on the market. Ergonomically designed, the spring-operated arms enable the user to position the puller behind the component with just one movement. The mechanical TMMA series consists of 3 (TMMA 60, TMMA 80 and TMMA 120) pullers differing in size and withdrawal force.


Sturdy design allows dismounting of components even in the tightest application in a safe manner
The unique red rings spring-operated opening mechanism allows the EasyPull to be placed behind the component with one movement of the hands
Self-locking arms help prevent the risk of puller slipping under load
Double hexagonal heads allow easier application of withdrawal force
Self-centring capability and nosepiece help to avoid damage to shaft
Efficient use of time due to quick dismounting
Available in three sizes with a withdrawal force of 60, 80 or 120 kN (6.7, 9.0 or 13.5 ton US), enabling easy selection
Hydraulic force generators available as an accessory for the 80 and 120 kN versions
Safe and simple bearing dismounting

Equipped with spring-operated arms and a solid design, SKF's patented EasyPull is one of the most user-friendly and safe tools on the market. Ergonomically designed, the spring-operated arms enable the user to position the puller behind the component with just one movement. The mechanical TMMA series consists of 3 (TMMA 60, TMMA 80 and TMMA 120) pullers differing in size and withdrawal force.


Sturdy design allows dismounting of components even in the tightest application in a safe manner
The unique red rings spring-operated opening mechanism allows the EasyPull to be placed behind the component with one movement of the hands
Self-locking arms help prevent the risk of puller slipping under load
Double hexagonal heads allow easier application of withdrawal force
Self-centring capability and nosepiece help to avoid damage to shaft
Efficient use of time due to quick dismounting
Available in three sizes with a withdrawal force of 60, 80 or 120 kN (6.7, 9.0 or 13.5 ton US), enabling easy selection
Hydraulic force generators available as an accessory for the 80 and 120 kN versions
Safe and simple bearing dismounting

Equipped with spring-operated arms and a solid design, SKF's patented EasyPull is one of the most user-friendly and safe tools on the market. Ergonomically designed, the spring-operated arms enable the user to position the puller behind the component with just one movement. The mechanical TMMA series consists of 3 (TMMA 60, TMMA 80 and TMMA 120) pullers differing in size and withdrawal force.


Sturdy design allows dismounting of components even in the tightest application in a safe manner
The unique red rings spring-operated opening mechanism allows the EasyPull to be placed behind the component with one movement of the hands
Self-locking arms help prevent the risk of puller slipping under load
Double hexagonal heads allow easier application of withdrawal force
Self-centring capability and nosepiece help to avoid damage to shaft
Efficient use of time due to quick dismounting
Available in three sizes with a withdrawal force of 60, 80 or 120 kN (6.7, 9.0 or 13.5 ton US), enabling easy selection
Hydraulic force generators available as an accessory for the 80 and 120 kN versions
tmma 75h/Set TMMA pullers series: mechanical EasyPull tmma75/h
Safe and simple bearing dismounting

Equipped with spring-operated arms and a solid design, SKF's patented EasyPull is one of the most user-friendly and safe tools on the market. Ergonomically designed, the spring-operated arms enable the user to position the puller behind the component with just one movement. The mechanical TMMA series consists of 3 (TMMA 60, TMMA 80 and TMMA 120) pullers differing in size and withdrawal force.


Sturdy design allows dismounting of components even in the tightest application in a safe manner
The unique red rings spring-operated opening mechanism allows the EasyPull to be placed behind the component with one movement of the hands
Self-locking arms help prevent the risk of puller slipping under load
Double hexagonal heads allow easier application of withdrawal force
Self-centring capability and nosepiece help to avoid damage to shaft
Efficient use of time due to quick dismounting
Available in three sizes with a withdrawal force of 60, 80 or 120 kN (6.7, 9.0 or 13.5 ton US), enabling easy selection
Hydraulic force generators available as an accessory for the 80 and 120 kN versions
Combined internal and external puller

The multipurpose SKF TMMR F jaw pullers are able to grip on both the outside as well as the inside of a component, with equal strength. The TMMR Fs are available as a complete set, TMMR 8.

Both internal and external pulling
Puller for use in every workshop
Self-locking arms
Special safety neck avoids damaging of thread and arms
Hexagonal head on beam allows rotation of bearing during dismounting
Gripping range from 23 to 350 mm (0.9 to 13.8 in)
Also available as complete set on a stand
Safe and simple bearing dismounting

Equipped with spring-operated arms and a solid design, SKF's patented EasyPull is one of the most user-friendly and safe tools on the market. Ergonomically designed, the spring-operated arms enable the user to position the puller behind the component with just one movement. The mechanical TMMA series consists of 3 (TMMA 60, TMMA 80 and TMMA 120) pullers differing in size and withdrawal force.


Sturdy design allows dismounting of components even in the tightest application in a safe manner
The unique red rings spring-operated opening mechanism allows the EasyPull to be placed behind the component with one movement of the hands
Self-locking arms help prevent the risk of puller slipping under load
Double hexagonal heads allow easier application of withdrawal force
Self-centring capability and nosepiece help to avoid damage to shaft
Efficient use of time due to quick dismounting
Available in three sizes with a withdrawal force of 60, 80 or 120 kN (6.7, 9.0 or 13.5 ton US), enabling easy selection
Hydraulic force generators available as an accessory for the 80 and 120 kN versions
Combined internal and external puller

The multipurpose SKF TMMR F jaw pullers are able to grip on both the outside as well as the inside of a component, with equal strength. The TMMR Fs are available as a complete set, TMMR 8.

Both internal and external pulling
Puller for use in every workshop
Self-locking arms
Special safety neck avoids damaging of thread and arms
Hexagonal head on beam allows rotation of bearing during dismounting
Gripping range from 23 to 350 mm (0.9 to 13.8 in)
Also available as complete set on a stand
Multi-purpose kit for quick and easy mounting and dismounting

The SKF Combi kit TMMK 10-35 is designed for quick and precise mounting of bearings with bore diameters from 10 to 35 mm and for dismounting deep groove ball bearings from shafts, housings and blind housings from the same range.
For mounting, a multipurpose fitting tool is included which is suitable for mounting bearings as well as bushings, seal rings, belt pulleys and other similar products.

For dismounting of deep groove ball bearings from blind housings and shafts, the SKF Combi kit contains a unique three armed puller. When dismounting deep groove ball bearings from housings, a combination of this puller, sliding hammer and support rings enables easy removal of bearings


All parts are clearly arranged in the case for easy selection and identification
The correct combination of impact ring and sleeve helps ensure that mounting forces are not transmitted via the rolling elements of the bearing, minimizing damage to bearing due to incorrect mounting
The impact rings are made of high-impact modified polyamide. The impact sleeves are made of glass fibre-reinforced, high-impact modified polyamide, which is super-tough, strong and lightweight
The dead-blow hammer has nylon faces and is steel-shot loaded for maximum impact. The handle, with comfortable rubber-grip for good handling, absorbs shock and vibration
A complete kit of different sizes puller arms and spindles facilitates the dismounting of up to 49 different SKF deep groove ball bearings
The claws are especially designed to facilitate a precise fit in the bearing's raceways, providing good grip and allowing the application of higher dismounting forces
The designation is laser-engraved on the arms allowing easy identification and selection
The springs are colour-coded allowing easy selection and matching
Elastic locking ring results in easy connection of puller arms to spindle
Heavy sliding weight of the sliding hammer generates a high dismounting force