Home > Skf Lubricants >

SKF LAGD 400 MultiPoint Automatic Lubricator, Connect up to Eight Feed Lines, 16' Maximum Feed Line Length, Power Supply 110-240 VAC, 50-60 Hz or 24 VDC
SKF LAGD 400 MultiPoint Automatic Lubricator, Connect up to Eight Feed Lines, 16' Maximum Feed Line Length, Power Supply 110-240 VAC, 50-60 Hz or 24 VDC


 
Our Price: $1,670.80

Quantity in Stock:6
Product Code: LAGD400
Qty:

Description
 
The lubrication of bearings with the correct type and quantity of grease is essential for trouble-free operation. Research has shown that 36% of all bearings fail prematurely due to incorrect lubrication. Especially for installations with multiple lubrication points, this can be a time-consuming and costly process. LAGD 400, the centralised automatic lubricator, is the most user-friendly and cost-effective automatic lubricator for multiple grease lubrication points available today. Its compact design, combined with electronically controlled accuracy, makes it an excellent solution for longer bearing-life and increased uptime of your machinery.

Being a do-it-yourself lubrication system, SKF MultiPoint Automatic Lubricator can be easily installed without the assistance of a costly lubrication service company and requires no special training to use. Once the correct grease dispense rate for your application is calculated using SKF DialSet, SKF's re-lubrication calculation program, the LAGD 400 will keep up to eight lubrication points simultaneously and automatically lubricated, preventing both over and under-greasing. The transparent cartridge housing allows for easy inspection, while an electronic alarm will warn you when the grease cartridge is empty.
  • Do-it-yourself centralised lubrication system
  • Up to 8 feed lines
  • Easy-to-use
  • SKF DialSet program or LubeSelect for SKF greases can be used to calculate the amount of grease required over a given time period
  • Long feed lines (maximum up to 5 m/16 ft)
  • Electronic setting and read-out of control parameters
  • Alarm function for blocked feed lines and empty cartridge
  • Machine steering (i.e. lubricator only operates while machine is running)
  • High pressure capability (40 bar / 600 psi)
  • Tested and approved with all SKF greases
  • Uses standard SKF grease cartridges (420 ml)
  • Ready for use, all accessories included
Technical data
Designation
LAGD 400
Content
8-outlet lubricator

20 m tubing

Quick connectors for application side

2 Y-connectors

LGMT 2/0.4 grease cartridge
Number of feed lines
1 - 8
Maximum pressure
40 bar (600 psi)
Suitable grease
NLGI 1, 2 and 3
Maximum length of feed-lines
5 m (16 ft)
Ambient temperature
0 - 50 °C (32 - 120 °F)
Drive mechanism
Electro-mechanical
Volume
0,1 - 10 cm³/day (0.003 - 0.35 US fl. oz/day) per outlet
approx. 0,6 - 65 g/week (0.02 -2.3 oz/week)
Power
110-240V AC, 50-60Hz or 24V DC
Alarms
Blocked feed lines, empty cartridge; internal and external
External steering
External relay steering
IP rating
54
Lubrication tubes
20 m (65 ft), Nylon, 6 x 1,5 mm
(1/4 x 0.06 in.)
Connection thread
G 1/4
Height
510 mm (20 in.)
SKF AND BROWN TRANSMISSION LAGD 400 MULTI PORT LUBRICATOR

Share your knowledge of this product. Be the first to write a review »