Home > SKF MAINTENANCE TOOLS > Thermometer
Sort By:
Page of 1
TKTL 21 SKF Infrared Thermometer TKDT 10 SKF  Thermometer CMSS 3000 SL HEAVEY DUTY THERMOMETER SKF USA CMSS3
TKDT 10 SKF Thermometer
Our Price: $442.00
  • Advanced infrared thermometer
  • LCD colour display
  • 8 laser targeting
  • Type-K thermocouple probe
  • Adjustable emissivity
  • High accuracy
  • Fast response time
  • DS ratio of 30:1
Accurate temperature measurement in general industries

The ThermoPen is a user-friendly, durable pocket size thermometer. Its sturdy flexible probe tip ensures effective surface contact for accurate temperature measurement. Since no maintenance engineer should work without one, the ThermoPen is supplied with a handy pouch with belt clip for protection and portability. The ThermoPen measures the temperature of a wide variety of industrial applications such as bearing housings and gearboxes quickly and accurately.

Compact, ergonomic design
Wide measurement range, from -40 to 200 øC (-40 to 392 øF)
Temperature reading selection in øC or øF
Flexible probe tip for better surface contact, providing high measuring accuracy
Dust tight and water resistant, rated IP 65
Maximum temperature function allows temperature peak hold
Auto power off function
Ultra low power consumption
Technical Data:

Temperature range: -40 to 200 øC (-40 to 392 øF)
Electronic accuracy: œ 0,5 øC (œ 0.9 §F)
Display resolution: 1 øC/øF
Probe: K-Type
Dimensions: 163 x 50 x 21 mm (6.4 x 2 x 0.8 in)
Weight: 95 g (0.2 lb)
Battery: 3 x AAA (LR03)
Battery lifetime: 4,000 hours (average using Alkaline batteries)
Switch off: Button or automatic after 5 minutes
Display indications: Temperature, øC or øF, maximum temperature, out of range, defective robe, low battery
IP rate: IP 65
Drop resistance: 1 m (3.2 ft)

Heavy duty infrared thermometer

Infrared thermometer CMSS 3000-SL
There are many uses for this handheld, non-contact, heavy duty, infrared thermometer. Rugged and easy to use, it measures surface temperatures of hot, hazardous, moving or hard-to-reach objects safely without contact.
  • Dual point laser sighting
  • Adjustable emissivitY
  • 50:1 distance-to-spot size ratio
  • Temperature range –60 to +1 000 °C
    (–75 to +1 800 °F)
  • Exceptional battery life
  • High and low alarm
  • MAX, MIN, DIF, AVG temperature displays
  • Amber backlight LCD display
  • High intensity white LCD flashlight
  • Heavy duty magnet in base of handle
Technical data
CMSS 3000-SL
Heavy duty handheld infrared thermometer
Measurement range
–60 to +1 000 °C (–75 to +1 800 °F)
Operating range
0 to 50 °C (32 to +120 °F)
Tobj = 15 to 35 C° (60 to 95 °F),
Tamb = 25 °C (75 °F), ±1 °C (±2 °F)

Tobj = 35 to 1 000 C° (90 to 1 800 °F),
Tamb = 25 °C, ±3 °C (75 °F, ±5 °F);
±2% of reading or +2 °C (+4 °F), whichever is greater
Update frequency
1.4 Hz
Wave length response
8 to 14 μm
Emissivity range
0.95 default - adjustable 0.1 to 1 step 0.01
Relative humidity
5 to 95% non-condensing
From –9.9 to + 199.9 °C (14.2 to 391.8 °F);
0.1 °C (0.2 °F)
Response time (90%)
<1 sec
Distance spot ratio
47,0 x 197,0 x 203,3 mm
(1.85 x 7.71 x 7.90 in.)
386,1 g (13.62 oz.) including batteries
Two AAA batteries (included)
Battery life
Typical 180 hours, minimum 140 hours continuous use (Alkaline, without laser and back light)
Maximum, Minimum, Average, Difference, Lock
TMTI 2DTS SKF Advanced Thermal Imager
Comprehensive high resolution thermal imagers with dual temperature function

The advanced thermal imager TMTI 2DTS is a user-friendly thermal imager, producing high quality images from invisible infrared radiation. The high resolution (160x120 /19 200 pixels) images are displayed on a large backlit 3½” screen, for ease of viewing. Powerful PC and report-writing software is supplied as standard, which help enable the user to perform comprehensive data analysis and enhancement of the images.

Advanced temperature measurement features are built-in to the thermal imager TMTI 2DTS such as, automatic hot spot and cold spot finder, Maximum/Minimum temperature view of an area and temperature difference display of two user defined spots. Suitable for industrial environments, the TMTI 2DTS is supplied in a heavy duty case with software, rechargeable battery, battery charger, rubber protection sleeve, high temperature range filter and a SD memory card for image storage.

Compact ergonomic design and light weight helps make the thermal imager TMTI 2DTS suitable for use in most industrial applications
Easy to navigate menu makes the TMTI 2DTS a user-friendly instrument and helps facilitate ease of use
Non-contact measurement technique enabling measurements to be made safely on running equipment
Wide temperature measurement range from –10 °C to 500 °C is ideal for Predicative Maintenance applications
User selectable emissivity correction from 0,2 to 1,0 with reflective ambient temperature correction, helps ensure that the TMTI 2DTS is suitable for almost any application
Convenient temperature measurement in K, °C and °F eliminates the necessity to convert temperature reading
Laser pointer pinpoints the area of interest. Easy to associate the hot spot on the screen with the target in the field
4 different selectable colour pallets (ironbow, rainbow, high contrast rainbow & greyscale) for ease of viewing
20° x 15° field of view easily enables the application to be seen
Large thermal image storage capacity, up to 1 000 images (in radiometric format) can be stored on the SD card provided. Easy for data collection and subsequent reporting
Rubber protection sleeve helps protect the imager from damage